• Power Supply: 220-240V, 3400 W heater.
• Compressed air supply minimum of 85 psi, 2 cfm of clean dry air. Pressure regulator is built in.
• Two 4″ dual diaphragm pumps with unique shuttle valve for long life, output is 3.7 gal/min.
• Microprocessor: Controls work flow. Self diagnostics with plain-English messages.
• Digital display with an easy to use menu.
• Shipping Dimensions: 49″ w x 29″ d x 54″ h
• Shipping Weight: 500 lbs.

The DB100N Solvent Recycler recycles up to 20 gallons of solvent per batch, cutting solvent purchase and disposal costs by up to 90%. Ideal for acetone, paint thinner, and varsol, it features a 3400W heater, dual diaphragm pumps, and a smart microprocessor with diagnostics and LCD display. Built with stainless steel for durability, it includes a self-diagnostic system, automatic or timed shut-off, and safety certifications for use in hazardous locations. Commonly used in paint shops, fiberglass, and metal fabrication, the DB100N delivers clean solvent daily while reducing environmental impact.

Capacities For Industrial Solvent Recyclers

Features:

• Distillation by vaporization and condensation.
• Input is 220-240 V, 20 A breaker and the heating element is 3,400 W.
• Direct electric heating with no oil to change or refrigerant to service for lower maintenance.
• Sophisticated solid-state microprocessor controls the work flow and continuously monitors operating parameters. Many built in safety programs. The computer display (LCD) shows the set point and real-time temperatures at the tank and condenser. Special features in the computer menu allow for:

1) lowering of the heater wattage to make the boiling phase less vigorous; this is important for low boiling point solvents such as acetone.

2) increasing the post heat time to make the solvent residue dryer thus increasing recycling efficiency.

• The temperature set points can be adjusted precisely in one-degree increments.
• Complete self diagnostic system: sensors monitor the operating system; faults are described in plain-English messages for easy diagnostics.
• Dual pump transfer system to pump dirty solvent directly into the distillation tank and pump clean recycled solvent from the recycler to a clean drum.
• Automatic or timed shut off. (the operator specifies quantity of hours for timed shut-off.)
• Outer cabinet, cover and lid are made from 304-grade stainless steel for long life.
• High efficiency condenser is air cooled by motor driven fan. Constructed from 316-grade stainless steel for corrosion resistance and long life.
• Comes with 3 heat resistant liner bags to capture residue and 2 lid gaskets.

Options:

• Vacuum Assist                                      P
• Pneumatic Drum Mixer                     M
• Pat-Light with Buzzer                         L
• Rapid Tank Cooling                            A
• Filter system for water recycling     W
• Recycle solvent and water mixture G

Safety:

• Certified to UL safety standard 2208 and CSA standard 22.2 no. 30 and 88 by ETL for use with solvents in Class 1, Division 1, group D locations. UL2208, with many built in safety programs, is the safety standard for solvent recyclers.
• Additional safety features include the lid pressure relief system, safety cover and lid lock.

Operation:

IMPORTANT SAFETY AND USAGE ADVISORY

Do not recycle solvents that includes Nitrocellulose due to its low auto ignition temperature and Peroxides due to its thermal decomposition. Check the Safety Data Sheet of both the solvent and waste material for the presence of these 2 substances.

Operation:

Turn the Timer to pump 16 gal of used solvent into the bag in the distillation tank. Press Start to turn on the heating element. The solvent vaporizes, travels through the condenser where it is cooled to a liquid by an electric fan and then flows into the receiving pail.  The residue that remains in the heat resistant liner bag is transferred to a waste drum for later disposal. Most residues including waste paint is disposed of as a hazardous material.

Typical Applications

• Reclaim lacquer thinners and acetone used to wash paint and debris from spray guns and other spray equipment.
• Reclaim acetone used to clean equipment used in making fiberglass products.

Typical users:

• Industrial Paint Shops, Fiberglass Fabricators, Printers and Metal Fabricators.